1、應定時對工業提高門上的塵埃進行清潔，堅持工業門及玻璃、五金件的清潔和亮光。
2、假如工業門上污染了油污等難以清潔的東西,可以用去污劑擦洗,最佳不要用強酸或強堿溶液進行清潔,這樣不只簡單使型材外表光潔度受損,也會破壞五金件外表的保護膜和氧化層而導致五金件的銹蝕,特別是有些客戶在用硫酸清潔墻面時,千萬留意不要讓門窗受染。
3、應及時整理框內側顆粒狀等雜物,避免其堵塞排水通道而導致排水不暢和漏水表象。
4、在敞開工業門時,力度要適中,盡量堅持敞開和封閉時速度均勻。
5、盡量避不用堅固的物體碰擊工業門或劃傷型材外表。
6、在發現工業門在使用過程中有敞開不靈敏或其它異常情況時,應及時查找緣由,假如客戶不能掃除毛病時,可與工業門生產廠家和供貨商聯絡,以便毛病能得到及時掃除。
1, should be regularly cleaned to raise door industrial dust, adhere to the industrial door and glass, hardware clean and light.
2, if the industrial door pollution in oil is difficult to clean things, can scrub with detergent, best not to clean with strong acid or alkali solution, so that not only so simple profile appearance finish damaged, film and oxide layer protection will also destroy the hardware appearance caused pieces of metal corrosion, especially some customers to clean the wall with sulfuric acid, do be careful not to let the doors and windows by staining.
3, should be promptly organize frame inside granular debris, avoid blocking the drainage channel and lead to poor drainage and water imagery.
4, in the open industrial doors, efforts should be moderate, try to keep an open and close speed is even.
5, try to avoid needless to solid objects hit the industrial door or scratch profile appearance.
6, found in industrial door in the use of the process has open insensitive or other abnormal situation, should be timely find the reason, if the customer cannot remove the faults, with contact and supplier of industrial door manufacturers, so that problems can be timely cleaning.
相關標簽：
